Go back

ProtectGuard®

Water and oil-repellent, soiling and graffiti protection for porous materials

ProtectGuard® is the leading product for all-round protection for all porous building materials.

ProtectGuard® provides long-lasting protection for all porous materials and prevents the main causes of damage like atmospheric pollution, grease marks, fluid ingress, graffiti, etc. It slows down the ageing of the material and makes it easier to maintain.

ProtectGuard® is a non-film forming impregnation product, the material remains permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the type of treated material. It is also fully resistant to UV rays and does not yellow over time.

  • Beading effect
  • 10 years guarantee
  • Eco-friendly
  • Coverage (1L = 6m2)
  • Floors, facades, roofs
Advantages
  • Protects against water, oil, stains and graffiti
  • Does not form a film, lets the material breath
  • Odourless and invisible: does not change the colour
  • UV and frost resistant
  • Slows down ageing and makes maintenance easier
USE
  • Porous materials: natural or reconstituted stone, concrete, terracotta, render, etc.
  • Floors, walls and roofs
  • New or old
  • Internal or external
  • Recommended for patios, drives, pool surround areas, walls, gables, tiling joints, etc.
Back to the list
Advantages
  • Protects against water, oil, stains and graffiti
  • Does not form a film, lets the material breath
  • Odourless and invisible: does not change the colour
  • UV and frost resistant
  • Slows down ageing and makes maintenance easier
USE
  • Porous materials: natural or reconstituted stone, concrete, terracotta, render, etc.
  • Floors, walls and roofs
  • New or old
  • Internal or external
  • Recommended for patios, drives, pool surround areas, walls, gables, tiling joints, etc.

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    To remove stains and traces of pollution, use Guard Wash® or Guard Wash® Express.
  • 3
    To remove grease stains, use Net'Guard® Ultra 4 in 1.
  • 4
    To remove traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
  • 5
    Rinse carefully until the surface is free of any trace of cleaner.

Application :

  • Use the product in its pure form: do not dilute it. Shake the packaging well before use and carry out a preliminary test.
  • The material must be impregnated up to saturation in a single coat or two coatsÔÇŁwet on wetÔÇŁ.
  • Do not overload the material, remove any excess before drying.
  • On vertical materials, apply from bottom to top
  • Protected drying: 24 hours.
  • Optimal efficiency reached after 7 days.

For further information, refer to the data sheet and safety sheet.

  • Apply using a low-pressure sprayer, roller or brush.

  • 2L

  • 5L

  • 10L

  • 25L

  • Technical data sheet

  • Safety data sheet