Go back
ImperGuard Ultra 4 in 1 – Water Repellent and Stone Hardener, Stain Protection & Moss Resistant
All-in-one protection that repels water, prevents stains and moss, and strengthens stone.
4-in-1 protection: water repellent, anti-moss, anti-stain and stone strengthening action. ImperGuard® Ultra 4 in 1 is a multi-action protective sealer combining water repellency, stain resistance, moss prevention and a stone hardener in a single application. ImperGuard Ultra 4 in 1 is highly powerful water-repellent resistant to water, fungi, grease, stains and with consolidating effect reinforcing the stone against ingress.
- Action 1: Water-repellent, protects porous materials from rainwater penetration and also suppresses the harmful effects of ingress, acid rain, erosion, freeze/thaw cycle.
- Action 2: Anti-green deposits, it limits the formation of mosses, lichens and fungi.
- Action 3: Anti-stain, sustainably inhibit the penetration of all types of soiling, even greases. Easy to maintain the substrate.
- Action 4: Remineralisation effect, reinforcing the masonry against ingress.
ImperGuard Ultra 4 in 1 is a non-film forming impregnation product, the material remains permeable to air and water vapour. Completely clear after application, it does not change the nature of the treated material (no risk of bleaching). It is also fully resistant to UV rays and does not yellow over time.
5 years guarantee-
Beading effect
-
Coverage (1L = 8m2)
-
Floors, facades, roofs
Advantages
- 4-in-1 action: water repellent, anti-stain, anti-moss and stone strengthening
- Protects against moisture, grease and environmental damage
- Limits moss, lichens and fungi growth
- Reinforces stone structure against water ingress
- Self-cleaning technology
- Odourless and clear: does not bleach
- Effective for 5 years
- Does not form a film, lets the material breathe
- UV and frost resistant
USE
- Porous materials: natural or reconstituted stone, concrete, terracotta, rendering, etc.
- Facades, walls, floors and roofs
- New or old
- External
Back to the list
Advantages
- 4-in-1 action: water repellent, anti-stain, anti-moss and stone strengthening
- Protects against moisture, grease and environmental damage
- Limits moss, lichens and fungi growth
- Reinforces stone structure against water ingress
- Self-cleaning technology
- Odourless and clear: does not bleach
- Effective for 5 years
- Does not form a film, lets the material breathe
- UV and frost resistant
USE
- Porous materials: natural or reconstituted stone, concrete, terracotta, rendering, etc.
- Facades, walls, floors and roofs
- New or old
- External
Surface preparation :
-
1Apply the product to a clean, dust-free, grease-free and dry surface.
-
2To remove stains and traces of pollution, use Guard Wash® Express.
-
3To remove grease stains, use Guard Cleaner Surface.
-
4To remove traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
-
5To eliminate green deposits, lichens and fungi, use Guard Anti-M® 24.
-
6Rinse carefully until the surface is free of any trace of cleaner.
Application :
- Use the product in its pure form: do not dilute it.
- Shake the packaging well before use and perform a preliminary test to check that the product has correctly penetrated and the appearance after drying.
- The material must be impregnated up to saturation in a two coats to four coats “wet on wet” depending on the porosity.
- Always apply from bottom to top.
- Do not overload the material, remove any excess before drying. Risk of white marks.
- Protected drying: 24 hours.
- Optimum efficiency reached after 7 days.
For further information, refer to the data sheet and safety sheet.
A project ? Contact a sales representative
Our sales teams support you throughout your project, from the choice of products to their implementation.
Related products
Protection
ImperGuard Plant-Based – High-Performance Waterproofing for Porous Facades and Roofs
Deep-penetrating protection against moisture, frost and weather damage with advanced plant-based technology. High-performance waterproofing solution for porous facades and roofs exposed to weather and moisture. It penetrates deeply to block water infiltration, reduce damage caused by freeze-thaw cycles and limit the formation of moss and lichen, helping extend the lifespan of treated materials.
Discover
Protection
ProtectGuard – Invisible Breathable Water Repellent for Porous Materials, Anti-Stain & Anti-Graffiti
Water, oil, stain and graffiti protection for porous materials.
Discover
Protection
ProtectGuard Heavy Duty – Water, Oil Repellent for High Traffic Areas – Long Lasting Protection for Dense Stone, Concrete
Long lasting water and oil-repellent, soiling and graffiti protection for high traffic areas and slightly porous natural stones and concrete.
Discover