Go back
Guard Hardener – Strengthen Weak Concrete, Stone and Brick and Stop Dusting
Strengthens weak concrete, stone and brick and stops dusting. Ideal for garage floors, basement walls, facades and old masonry. Makes damaged areas solid again and ready for painting or coating.
Guard Hardener strengthens weak, powdery or damaged concrete, stone and brick. It penetrates deep into the material to restore cohesion and make surfaces solid again, even after exposure to moisture or water infiltration.
It is especially effective on areas that crumble, dust or lose strength over time. After application, treated areas become harder, more resistant and ready for further work such as painting or coating.
Guard Hardener is widely used on walls, floors and facades, both indoors and outdoors. It is ideal for concrete floors in garages, basements and workshops, old brick walls, stone facades, cement renders and screeds.
It can be applied on slightly damp or dry materials, making it practical for renovation projects where humidity is still present. It also helps control dust on concrete floors and worn surfaces, improving cleanliness and comfort in everyday use.
Typical applications include basement walls affected by moisture, dusty concrete garage floors, ageing stone facades, crumbling cement coatings and weakened brickwork.
Easy to apply, it is sprayed or rolled in two passes until the material no longer absorbs. Once dry, the treated area is stronger, cleaner and ready for finishing.
10 years guarantee
Floors, facades
Coverage (1L = 5m2)
Advantages
- Strengthens weak concrete, stone and brick
- Restores solid structure to damaged and crumbling areas
- Stops dusting on concrete floors and worn surfaces
- Ideal for garage floors, basements, walls and facades
- Works on damp or dry materials for easier renovation
- Prepares surfaces for paint, render or coating
- Improves durability of old masonry and cement
- Easy application: spray or roll, fast penetration
USE
Use Guard Hardener on:
- Dusty concrete garage floors and workshop floors
- Basement walls affected by moisture or humidity
- Old brick walls that crumble or lose strength
- Stone facades exposed to weather and ageing
- Cement renders and screeds that become powdery
- Interior walls before painting or coating
- Exterior facades before renovation work
- Concrete floors before applying paint or resin coatings
Back to the list
Advantages
- Strengthens weak concrete, stone and brick
- Restores solid structure to damaged and crumbling areas
- Stops dusting on concrete floors and worn surfaces
- Ideal for garage floors, basements, walls and facades
- Works on damp or dry materials for easier renovation
- Prepares surfaces for paint, render or coating
- Improves durability of old masonry and cement
- Easy application: spray or roll, fast penetration
USE
Use Guard Hardener on:
- Dusty concrete garage floors and workshop floors
- Basement walls affected by moisture or humidity
- Old brick walls that crumble or lose strength
- Stone facades exposed to weather and ageing
- Cement renders and screeds that become powdery
- Interior walls before painting or coating
- Exterior facades before renovation work
- Concrete floors before applying paint or resin coatings
Application :
• Remove traces of saltpetre or efflorescence on
the surface.
• Dilute the product halfway (1 volume of Guard Hardener to volume of water).
• Spray on 2 coats of product with an interval of at least 1 hour between them, until the product ceases to soak in.
• Do not overload the support, remove the excess before drying (risk of whitish deposits and/or shiny appearance).
• Optimal efficiency obtained after 2 to 15 days of drying.
• To protect the support against water and stains, complete the treatment with the application of the protective product ProtectGuard HD. This processing will take place after a period of 10 days minimum.
Important note:
If there is thickly clustered white powder (sodium) on
the surface, simply brush it off with a gentle scrubbing
brush (Mexican dandy brush) 5 to 8 days after applica
tion. Before any painting or rendering work, wait 1 to
2 months for the excess of this powder to come away
and check adhesion by performing a test.
Product is alkaline. Handle preferably with gloves and goggles. Protect painted surfaces, glass, tiles and light alloys (aluminium, chrome, copper, zinc, etc).
Accidental splashes should be rinsed off immediately with water.
-
5L
Related products
Treatment and mineralizing
Guard Hardener® W
High-performance surface hardener and water-repellent
Discover
Protection
ImperGuard® Plant-based Formula
High-performance water repellent for porous walls and roofs. Vegetable-based formula
Discover
Cleaning
Guard Remover Efflorescence & Cement Plant-based – Fast-Acting Residue and Efflorescence Cleaner in 5 Minutes
Fast-acting cement remover for post-construction cleaning and efflorescence. Laitance and grout film cleaner. 5-Minute Fast-Acting Bio-Based Formula.
Discover
Protection
ProtectGuard® HD
Water and oil-repellent, soiling and graffiti protection for heavy duty floors and slightly porous materials
Discover