WoodGuard Anti-Graffiti – Invisible Permanent Protection for Exterior Wood (High-Performance & Multi-Clean Resistant)

• Apply in the direction of the wood grain.
• Shake product A (base) thoroughly before
use.
• Add part B (hardener) slowly to part A (base) of
WoodGuard® AntiGraffiti, stirring continuously.
Use an electric stirrer to stir at medium speed
until the mixture is homogeneous (5 to 15 min
depending on quantity).
• Leave the mixture exposed to the air for 15
to 30 min to allow bubbles to escape, then stir
again for 1 min before use.
• The resulting mixture can be used for 6 hours if
the ambient temperature is below 25°C. If the
temperature is higher, plan to complete your
application in a shorter time of around 4 hours.
Do not use the mixture after this time.
Applying the 1st layer:
• Apply WoodGuard® AntiGraffiti diluted with
not more than 5 to 10% water. Mix thoroughly.
The first layer must be regarded as a primer
layer designed to both impregnate the wood and
provide a key for the next layer. Coverage: 65 to
100 g/m2.
• Apply sparingly to avoid producing a thick film
that does not breathe.
• Apply if possible to all visible surfaces.
• Leave to dry for 30 min to 1 hour at 20°C. The
substrate must be dry and non-tacky before the
second layer is applied.
Applying the 2nd layer:
• If there are many loose wood fibres, the surface
can be sanded down to obtain a smooth surface.
• Apply the second layer sparingly using undiluted
WoodGuard® AntiGraffiti. Coverage: 70 to 100
g/m2.
• On very absorbent wood such as old wood,
a third layer may be needed. Proceed as for
the second layer after the second layer has
completely dried.
• Protect from rain for 24 hrs and from oily
deposits for at least 48 hrs.
• Optimal performance is attained after 5 to 7
days.