Guard Remover Efflorescence & Cement – Removes Cement Residue, Mortar Film and White Salts in 5 Minutes

Fast cement residue remover for concrete, stone and tiles. Removes mortar film, white salts and limescale in 5 minutes. Non corrosive, non irritant and no neutralisation needed.

Guard Remover Efflorescence & Cement is a fast-acting cleaner designed to remove cement residues, mortar film, white salts (efflorescence) and limescale deposits after construction or renovation work.

It works in just 5 minutes to dissolve cement haze, joint residues and mineral deposits that remain on concrete, natural stone, reconstituted stone, terracotta and tiles.

Unlike many cement removers, this formula is non corrosive and non irritant, which makes it safer to use on site while still delivering strong cleaning performance.

Its patented technology allows efficient removal of cement film without aggressive attack on the material. It is specifically designed to balance cleaning power and material respect.

It can be used indoors and outdoors on floors and walls.

Key performance:

removes cement residue and mortar haze
eliminates white salts (efflorescence)
dissolves limescale and construction deposits
fast action in 5 minutes
safer use: non corrosive, non irritant

Sales contact

Coverage (1L = 6m²)
Hyperactive
Quick action
Floors, facades, roofs

Back to the list

bidon_en_guard_remover_eco_efflorescence-cementRemoves Cement Residue, Mortar Film and White Salts in 5 Minutes

Application :

• Shake the product well before use and apply neat.

• Apply the product liberally to the surface.
• Allow it to act 5 minutes maximum while brushing with a thick bristle broom to improve the result.
• NOTE: On concrete, blue stone or artificial stone, wet the surface beforehand then apply the diluted product (1 volume of product for 1 volume of water). Allow it to act 3 minutes.
• Do not allow the product to dry prior to rinsing.
• Thoroughly rinse the entire substrate with a high-pressure washer or a water jet.