Go back

ImperGuard®

High-performance water protection for all porous building materials

ImperGuard® is a high-performance water-repellent designed to protect porous walls, facades and roofs against damp.

ImperGuard® penetrates deep into the pores of materials to make them impermeable and therefore limit the negative effects caused by damp, water ingress, acid rain, erosion, icing/melting cycles, formation of moss and lichens, the appearance of efflorescence or saltpeter, etc. The water repellent properties of ImperGuard® are acquired very rapidly (from a few hours to 3 days).

ImperGuard® also possesses dust protection qualities. It enables the surface of materials to be hardened to make them less fragile and less dusty.

ImperGuard® is a non-film forming impregnation product, the material remains permeable to air and water vapour. Completely colourless after application, it does not change the appearance or the nature of the treated material. It is also fully resistant to UV rays and does not yellow over time.

See the distributors
  • Beading effect
  • 5 years guarantee
  • Eco-friendly
  • Facades, roofs
  • Coverage (1L = 6m2)
Advantages
  • Protects against water and damp
  • Dust protection effect|Strong penetrating power and quick-acting
  • Does not form a film, lets the material breathe
  • Odourless and invisible: does not change the colour
  • UV and frost resistant
USE
  • Porous materials: natural or reconstituted stone, concrete, terracotta, rendering, etc.
  • Facades
  • New or old
  • External
Back to the list
Advantages
  • Protects against water and damp
  • Dust protection effect|Strong penetrating power and quick-acting
  • Does not form a film, lets the material breathe
  • Odourless and invisible: does not change the colour
  • UV and frost resistant
USE
  • Porous materials: natural or reconstituted stone, concrete, terracotta, rendering, etc.
  • Facades
  • New or old
  • External
Application
Application tools
Packaging
Technical documents

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    To remove stains and traces of pollution, use Guard Wash® or Guard Wash® Express.
  • 3
    To remove grease stains, use Net'Guard® Ultra 4 in 1.
  • 4
    To remove traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
  • 5
    Rinse carefully until the surface is free of any trace of cleaner.

Application :

  • Use the product in its pure form: do not dilute it.
  • Shake the packaging well before use and perform a preliminary test to check that the product has correctly penetrated and the appearance after drying.
  • The material must be impregnated up to saturation in a single coat or two coats “wet on wet” depending on the porosity.
  • Always apply from bottom to top.
  • Do not overload the material, remove any excess before drying. Risk of white marks.
  • Protected drying: 24 hours.
  • Optimum efficiency reached after 2 to 3 days.

For further information, refer to the data sheet and safety sheet.

  •

    Apply using a low-pressure sprayer, roller or brush.

  • 5L

  • 20L

  •

    Technical data sheet

  •

    Safety data sheet

Related products

Protection
ProtectGuard®
Water and oil-repellent, soiling and graffiti protection for porous materials
Discover
Protection
ProtectGuard® WF Premium
Water and oil-repellent, stain protection with intense wet effect
Discover
Protection
ProtectGuard® HD
Water and oil-repellent, soiling and graffiti protection for heavy duty floors and slightly porous materials
Discover
All the products