Go back

Guard Remover Graffiti 2010 – Removes Graffiti Shadows, Marks and Residue

Eliminates faint traces and leftover stains after graffiti cleaning. Ideal for achieving a clean, uniform finish.

Guard Remover Graffiti® 2010 is designed to tackle the faint traces that often remain after paint or ink has been removed.

Even after cleaning, light outlines or dull areas can still be visible. This product helps erase those remaining imperfections and restore an even, consistent look.

It is particularly useful as a final step, improving the overall result once the main cleaning has been completed.

It can also be used on areas protected with anti-graffiti coatings, where controlled cleaning is needed to preserve the protection while improving appearance.

Applied with a brush, it works quickly to improve visual results and remove stubborn after-marks.

Suitable for outdoor use on walls, facades and exposed areas.

Coverage: approximately 3 to 5 m² per litre.

Precautions: corrosive product. Avoid contact with skin and eyes. Wear protective gloves, clothing and goggles. Use with care on painted areas and rinse quickly after application. Do not use on zinc, aluminium or similar metals.

See the distributors
  • Eco-friendly
  • Facades
  • Coverage (1L = 5m2)
Advantages
  • Eliminates spectres and ink residue
  • Strong penetrating power
  • Powerful stripper
  • Does not change material
USE
  • Mineral materials: natural or reconstituted stone, concrete, terracotta, tiling, etc.
  • Facades
  • External
See the color chart
Back to the list
Advantages
  • Eliminates spectres and ink residue
  • Strong penetrating power
  • Powerful stripper
  • Does not change material
USE
  • Mineral materials: natural or reconstituted stone, concrete, terracotta, tiling, etc.
  • Facades
  • External
See the color chart
Application
Application tools
Packaging
Technical documents

Application :

  • Use the product in its pure form: do not dilute it.
  • Shake the packaging well before use and carry out a preliminary test.
  • Apply the product on the surface being treated using a brush then work the surface in circular movements.
  • Let it take effect for approximately 2 to 10 minutes.
  • Rinse with plenty of water at low pressure with water that is as hot as possible (increase the pressure of the hydro cleaner).
  • Always dampen the under surface with water.
  • Repeat the full operation if necessary.
  • Rinse with plenty of cold water to neutralise the surface.

For further information, refer to the data sheet and safety sheet.

Safety Data Sheet available on the Quick-FDS website without the need to create an account: Quick-FDS Safety Data Sheet.       If required, an access guide is available further down on this page under the « Technical Document » section.

  •

    Apply with a brush.

  • 1L

  •

    Technical data sheet

  •

    Safety Data Sheet Access Guide