Go back

Guard Remover® Eco Efflorescence & Cement

Laitance and grout film biodegradable cleaner

Guard Remover® Eco Efflorescence & Cement is a stripper which rapidly removes mortar or concrete laitance, limescale deposits and traces of efflorescence.

Guard Remover® Eco Efflorescence & Cement is a new generation product, it is much less aggressive than other products on the market (it is not classified and labelled corrosive or irritant, which means that the risk of accidents during its use is greatly reduced).

Guard Remover® Eco Efflorescence & Cement was designed to meet the varying requirements of users applying it in terms of safety, effectiveness, impact on the environment and respect of treated surfaces. Guard Remover® Eco Efflorescence & Cement requires no neutralisation after rinsing with water.

 

  • Quick action
  • Eco-friendly
  • Floors, facades
  • Coverage (1L = 6m2)
Advantages
  • Removes laitance, efflorescence and limescale deposits
  • Powerful stripper
  • Quick efficiency
  • Non corrosive and non irritant
USE
  • All types of materials: natural or reconstituted stone, concrete, terracotta, tiling, etc.
  • Floors and facades
  • Internal and external
  • Ideal after fitting seals or preparing the material before a protective production is applied.
Back to the list
Advantages
  • Removes laitance, efflorescence and limescale deposits
  • Powerful stripper
  • Quick efficiency
  • Non corrosive and non irritant
USE
  • All types of materials: natural or reconstituted stone, concrete, terracotta, tiling, etc.
  • Floors and facades
  • Internal and external
  • Ideal after fitting seals or preparing the material before a protective production is applied.

Application :

  • Shake the product well before use and apply neat.
  • Always test on a small hidden portion of the substrate before applying.
  • To increase the efficiency, first wet the surface with water.
  • Apply the product liberally to the surface.
  • Allow it to act 5 minutes maximum.
  • Do not allow the product to dry prior to rinsing.
  • Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush off using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same time

For further information, refer to the data sheet and safety sheet.

  • Apply with a low-pressure garden type sprayer, a manual spray or brush.

  • 2L

  • 5L

  • 20L

  • Technical data sheet

  • Safety data sheet