- Use the product in its pure form: do not dilute it.
- Shake the packaging well before use and carry out a preliminary test.
- Apply GraffiGuard® 2010 on the surface being treated using a brush then work the surface in circular movements.
- Let it take effect for approximately 2 to 10 minutes.
- Rinse with plenty of water at low pressure with water that is as hot as possible (increase the pressure of the hydro cleaner).
- Always dampen the under surface with water.
- Repeat the full operation if necessary.
- Rinse with plenty of cold water to neutralise it.
For further information, refer to the data sheet and safety sheet.