Go back

ProtectGuard® Color

Coloured concrete stain, water and oil-repellent. Standard or High Jewellery shades

ProtectGuard® Color: one product, two functions:

1. Water and oil repellent
ProtectGuard® Color provides long-lasting protection against the main causes of deterioration like soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc. Treated materials, resistant to water/oil ingress and marks. The cleanliness of the treated surfaces is therefore ensured.

2. Pigmented stain
ProtectGuard® Color is a stain tailored for concretes. In contrast to a paint, it is a semi-transparent product which respects the mineral nature of materials. The final colour depends on the colour of the stain and the colour of the material. ProtectGuard® Color is available in 42 standard shades or 32 High Jewellery shades,

ProtectGuard® Color is a non-film forming impregnation product, the material remains permeable to air and water vapour. ProtectGuard® Color is a single-component product not requiring the application of a homogenising primer.

  • Beading effect
  • 10 years guarantee
  • Eco-friendly
  • Facades
  • Coverage (1L = 8m2)
Advantages
  • Protection against water, oil and stains
  • Colourless and homogenised
  • Respects the mineral nature
  • 42 standard colours – 32 High Jewellery shades
  • Available in matt, glossy finish
  • Certificated LEED
  • UV and ice resistant
  • Slows down ageing and makes maintenance easier
USE
  • All types of concretes: standard, reinforced, fibred, high-performance (UHPC, GRC)
  • Facades
  • New and old
  • Internal and external
Back to the list
Advantages
  • Protection against water, oil and stains
  • Colourless and homogenised
  • Respects the mineral nature
  • 42 standard colours – 32 High Jewellery shades
  • Available in matt, glossy finish
  • Certificated LEED
  • UV and ice resistant
  • Slows down ageing and makes maintenance easier
USE
  • All types of concretes: standard, reinforced, fibred, high-performance (UHPC, GRC)
  • Facades
  • New and old
  • Internal and external

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Eco Surface Preparation.
  • 3
    To remove grease stains, use Guard Cleaner® Eco Maintenance.
  • 4
    Rinse carefully until the surface is free of any trace of cleaner.

Application :

  • Use the product in its pure form: do not dilute it.
  • Shake the package well before use in order to fully homogenise the pigments with the rest of the composition
  • Carry out a preliminary test.

Application with HVLP :

  • Application from bottom to top in a maximum of 2 to 4 diagonal applications depending on the desired appearance. Do not overload.
  • Drying time between each coat: 15 minutes.

Application with roller (only used for 100% opacity & non-textured smooth surfaces):

  • Application from bottom to top in 2 or 3 coats using a brush, spread the product evenly on the material without overloading. If brush marks are left, even out with the short-nap roller
  • Drying time between each coat: 30 minutes.
  • Protected drying: 24 hours.
  • Maximum efficiency reached after 7 days.

For further information, refer to the data sheet and safety sheet.

  • Apply with the HVLP spray gun or roller.

  • 5L

  • Technical data sheet

  • Safety data sheet

  • Technical specifications

A project ? Contact a sales representative

Our sales teams support you throughout your project, from the choice of products to their implementation.