Go back

Primer Guard® Opacifier

Coloured primer to regulate the opacifying background of concrete

Primer Guard® Opacifier :one product, two functions:

1. Corrects colour defects

Primer Guard® Opacifier allows you to hide and to strongly mitigate the aesthetic defects of the concrete and to even out the colour before applying the protection. Under an opaque layer, it will reinforce the colour of the stains ProtectGuard Color® (single and two-component) when full coverage is required.

 

2. Gripping primer

Primer Guard® Opacifier is a product intended to be used as a primer before any application of Guard Industry two-component products on all types of concrete. It is essential to ensure that the finishing product holds well on this substrate. It facilitates adhesion by its ability to bond strongly to porous or low porous concrete. Primer Guard® Opacifier leaves the support permeable to air and water vapour.

  • Facades
  • Eco-friendly
  • Coverage (1L = 15m2)
Advantages
  • Opaque finish: corrects the appearance of the substrate
  • Reinforces the shade of┬áProtectGuard Color┬«┬ástains
  • Very strong adhesive power
  • Essential for the adhesion of bi-component products
  • Allows the treated material to breathe
  • Ready to use
USE
  • All types of concrete standard, reinforced, fibre, UHPC, GRC
  • Facades
  • New or old
  • External or internal
Back to the list
Advantages
  • Opaque finish: corrects the appearance of the substrate
  • Reinforces the shade of┬áProtectGuard Color┬«┬ástains
  • Very strong adhesive power
  • Essential for the adhesion of bi-component products
  • Allows the treated material to breathe
  • Ready to use
USE
  • All types of concrete standard, reinforced, fibre, UHPC, GRC
  • Facades
  • New or old
  • External or internal

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Surface Preparation.
  • 3
    To remove grease stains, use Guard Cleaner® Maintenance.
  • 4
    Rinse carefully until the surface is free of any trace of cleaner.
  • 5
    Wait for complete drying through, approximately 24 hours before treatment.

Application :

  • Use the product in its pure form: do not dilute it.
  • Mix the product well with an electric stirrer for 2 minutes before use and test beforehand.
  • Apply from bottom to top.
  • Apply in an even layer.
  • Apply the two-component product within 4 to 48 hours following the application of Primer Guard┬« Opacifier
  • NOTE: the support must remain dust and rain free until the application of the intended finishing product. It is also imperative that the primer is sticky when touched.

For further information, refer to the data sheet and safety sheet.

  • Apply with a sprayer (HVLP or airmix) or roller

  • 5L

  • 25L

  • Technical data sheet

  • Safety data sheet

A project ? Contact a sales representative

Our sales teams support you throughout your project, from the choice of products to their implementation.