Go back

AntiGraffitiGuard® Premium

Permanent graffiti protection, oil/water repellent for concrete

AntiGraffiti Guard® Premium Special Concrete is a very high performance two-part anti-graffiti product. Formulated with new generation resins it is much more effective in terms of protection of all porous and low porous concrete against all kinds of graffiti or tags (paint, felt pens, etc.) and dirt.

AntiGraffiti Guard® Premium Special Concrete protects treated surfaces permanently. It can be cleaned dozens of times (using GraffiGuard® 2010 graffiti cleaner) and will still keep working, so does not need to be reapplied after graffiti has been removed.

AntiGraffiti Guard® Premium Special Concrete is available in a flat or satin finish.

  • Beading effect
  • 5 years guarantee
  • Facades
  • Eco-friendly
  • Coverage (1L = 8m2)
Advantages
  • Permanent protection against graffiti
  • Protection against water, oil and stains
  • Colourless, flat or satin finish
  • Two-component, withstands 20 cleaning cycles
USE
  • All types of concrete: standard, reinforced, fibre, high-performance (UHPC, GRC)
  • Facades
  • New and old
  • External
Back to the list
Advantages
  • Permanent protection against graffiti
  • Protection against water, oil and stains
  • Colourless, flat or satin finish
  • Two-component, withstands 20 cleaning cycles
USE
  • All types of concrete: standard, reinforced, fibre, high-performance (UHPC, GRC)
  • Facades
  • New and old
  • External

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    The conditions of application and substrate preparation must meet French unified code of practice DTU 59.3.
  • 3
    To remove stains and traces of pollution, use Guard Wash® or Guard Wash® Express.
  • 4
    To remove grease stains, use Net'Guard® Ultra 4 in 1.
  • 5
    To remove traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
  • 6
    Rinse carefully until the surface is free of any trace of cleaner.

Application :

  • AntiGraffitiGuard┬« Premium Special Concrete
    is prepackaged in the correct ratios. All of
    component A must therefore be mixed with all
    of component B. Under no circumstances modify
    the A:B ratio.
  • Before use, thoroughly mix part A (base) using
    an electric stirrer until a homogeneous liquid is
    obtained.
  • Stirring continuously, add part B (hardener)
    to part A (base). Blend at moderate speed
    with an electric mixer for at least 5 min. Leave
    for 10 min. to allow bubbles to escape, then
    homogenise again with the electric mixer before
    application.
  • Once prepared, the mixture can be used for 2
    hours at an ambient temperature of less than
    20┬░C.

Applying the first coat in two layers:

  • In very hot weather: the first coat can be diluted
    to 10% in clean (drinking) water. Thoroughly homogenise the whole mixture.
  • Having first treated the substrate with PrimerGuard┬«, the product can now be applied to the substrate.
  • Leave to dry for 1 hour (assuming a temperature
    of 20┬░C).
  • Typical coverage on concrete: 60 to 100 g/m┬▓ (10
    to 16 m┬▓/litre).

 Applying the second coat in two layers:

  • For better control and ideal results, it is
    recommended that the 2nd coat be applied with
    an HVLP spray gun.
  • Typical coverage on concrete: 60 to 100 g/m┬▓ (10
    to 16 m┬▓/litre).
  • Protected drying: 24 hours.
  • Optimal effects obtained after 5 to 7 days.

For further information, refer to the data sheet and safety sheet.

  • For better control and ideal results, it is recommended that be applied using an HVLP type spray gun with 4 bars pressure. Application with a roller or a brush is also possible.

  • 1L

  • 5L

  • Technical data sheet

  • Safety data sheet (part A)

  • Safety data sheet (part B)

  • Technical specifications

A project ? Contact a sales representative

Our sales teams support you throughout your project, from the choice of products to their implementation.