Graffiti cleaning products

Graffiti cleaning agent - special ghost marking and residue remover GraffiGuard 2010
Product application

-> Back to the technical manual

PRECAUTIONS :

  • GraffiGuard 2010 is recommended for the treatment of substrates with low resistance to acids: render, sandstone, terracotta.
  • Use with caution on painted substrates. It is aggressive to zinc, aluminium and their component alloys.
  • Clean immediately after use.
  • Wear rubber gloves and protection glasses.

APPLICATION

  • Always test on a small hidden portion of the substrate before applying.

For optimal results :

  • Initially wet above and below the surface to be cleaned.
  • Apply GraffiGuard 2010 on the substrate to be cleaned by making circular movements with a brush.
  • Let it act for approximately 2 minutes for rings and spectrum, and 10 to 30 minutes for paint marks and residues.
  • Rinse thoroughly with low pressure water as hot as possible (increase the hydrocleaner’s pressure).
  • Repeat the entire process if necessary.

APPLICATION EQUIPMENT

Brush