
SPECIAL ANTI-SPECTRUM, ANTI-RING, ANTI-GRAFFITI CLEANERS
PRODUCT DESCRIPTION
GRAFFIGUARD 2010 is a product that eliminates stains and ink or paint residue, which can remain after cleaning off graffiti.
Ideal for removing rings or residual spectrums after using other curatives in the GraffiGuard range.
CHARACTERISTICS
- Non-flammable
- Easy to use
- Product in solvent phase
- May be used both inside and outside
Possible applications:
- Porous support
- Slightly porous support
- Non-porous support
- Support protected by ProtectGuard
- Painted Surfaces with care
- Brick, plaster, natural stone, concrete, coating…
COVERAGE PER LITRE
Average yield given for guidance only:
3 - 5 m²
USAGE
It is essential test an area prior to work.
Product recommended for surfaces with a weak resistance to acids such as plaster, sandstone and terra cotta.
For best results:
- Apply onto the surface to be treated, rub hard with the help of a brush in circular movements.
- Leave for about 2 minutes.
- Rinse with low-pressure water that is as hot as possible (increase the pressure of the hydro cleaner).
- Repeat this whole operation if necessary.
- Rinse abundantly.
- Time necessary to take effect:
- Rings and spectrums: 1 to 2 minutes.
- Paints: 10 to 30 minutes
Attacks zinc, aluminium and their alloys
TO VIEW THE APPLICATION VIDEO, CLICK BELOW :
APPLICATION VIDEO
PACKAGING
Cans : 1L, 5L.
To obtain the technical sheet, contact us with the
contact form and do not forget to fill all the field.
SECURITY FACT SHEET
>>>
Make a
simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89