Treatment products

Nonslip treatment Gliss'Guard
Product application

-> Back to the technical manual

PRECAUTIONS :

  • Do not dilute or mix with another product.
  • Do not apply on organic, metallic and waterproof materials.
  • On certain substrates, the treatment can alter the gloss level.
  • On certain types of marble, the treatment can be ineffective. In any event, test before applying.
  • Do not apply on polished and crystallised materials.
  • Do not apply during rain, and when surface or air temperature is < 5°C or > 30°C.
  • Keep in a dry place (between 5°C and 30°C).
  • Storage: 24 months following the production date when kept in the original unopened container.

APPLICATION

  • Substrates must always be clean, dustfree and dry.
  • Always test on a small hidden portion of the substrate before applying.
  • Do not dilute or mix with another product.
  • Pour or spray product onto the substrate, and apply it with a brush or low pressure spray unit.
  • Leave it to react for 40 <->60 minutes.
  • Ensure that the product remains even on the whole surface during the treatment, and add more if necessary. Depending on the substrate and the desired anti-slip effect, repeat the process.
  • Do not allow any part of the surface, being treated to 'dry' because this would cause uneven treatment.
  • When the reaction time is completed, carefully rinse with water. The treated surface may be immediately returned into use.
  • Clean equipment with water immediately after use.

MAINTENANCE

  • Regularly maintain the anti-slip treatment by using GlissGuard diluted (20% GlissGuard with 80% water).
  • Domestic stains can be cleaned with clear water or Net'Guard Ecological.

APPLICATION EQUIPMENT



Low pressure spray unit, brush.