A coloured permanent water repellent, stain and graffiti repellent for wood WoodGuard Color AntiGraffiti
Product application

APPLICATION

• Apply the product to a clean, dust-free and dry surface. Temperature needs to be > 10°C.
• If the surface needs to be cleared beforehand, we recommend using WoodGuard Revitalizer.
• Do not apply to wood which is varnished or polished.
• Do not apply during rain or excessive heat.
• Always carry out a trial on a small area, especially on wood which has already been treated with a fire retardent.
• Thoroughly shake product A before use.
• Slowly add product B, stirring constantly, to product A. Use an electric mixer and keep stirring at moderate speed until you obtain a homogenous mix (approximately 5 to 15 minutes, depending on quantity).
• Let the mix rest 15 to 30 minutes, uncovered, and mix again for 1 minute before use.
• The resulting mix can be used for 6 hours at a room temperature of 25°C or below. If the temperature is higher, prepare the product in smaller quantities. Do not use the product after 6 hours. To control the application process and for best results, apply WoodGuard Color AntiGraffiti using an HVLP

APPLICATION EQUIPMENT