WoodGuard Color Antigraffiti

HIGH PERFORMANCE PROTECTION OF WOOD

PRODUCT DESCRIPTION

WoodGuard^® Color AntiGraffiti is a 2 component product ensuring long lasting protection for any vertical wood surfaces, whether untreated or painted, against graffiti and all kinds of marks (paint, marker pens…), as well as water and grease stains. WoodGuard^® Color AntiGraffiti can be used indoors and outdoors on any type of wood: teak, pine, exotic wood, oak…

WoodGuard^® Color AntiGraffiti offers a permanent protection of treated surfaces. Repeated cleaning - using anti-graffiti cleaner GraffiGuard^® 2050 will not affect the protective layer, requiring only a single application of WoodGuard^® Color AntiGraffiti.

WoodGuard^® Color AntiGraffiti is not a coating, but a decorative protective formulation. It penetrates all the fibres of the wood and protects against graffiti, humidity, grease and other stains without affecting the natural structure and aspect of the wood (veins, fibres…).

CHARACTERISTICS

Can be used on all types of wood, indoors and outdoors.
Permanent anti-graffiti.
Offers protection under all weather conditions with resistance to dirt and staining.
Significantly reduces moisture absorption due to humidity.
High protections against UV; does not yellow and prevents wood from greying.
High resistance to abrasion and scratches.
Restricts organic growth.
Preserves the natural aesthetics of wood.
Makes wood easy to clean.

COVERAGE PER LITRE

This depends on the wood absorbency. The figures below are intended as a guide: 4 to 8 m² / litre

USAGE

Apply the product to a clean, dust-free and dry surface. Temperature needs to be > 10°C.
If the surface needs to be cleared beforehand, we recommend using WoodGuard^® Revitalizer.
Do not apply to wood which is varnished or polished.
Do not apply during rain or excessive heat.
Always carry out a trial on a small area, especially on wood which has already been treated with a fire retardent.
Thoroughly shake product A before use.
Slowly add product B, stirring constantly, to product A. Use an electric mixer and keep stirring at moderate speed until you obtain a homogenous mix (approximately 5 to 15 minutes, depending on quantity).
Let the mix rest 15 to 30 minutes, uncovered, and mix again for 1 minute before use.
The resulting mix can be used for 6 hours at a room temperature of 25°C or below. If the temperature is higher, prepare the product in smaller quantities. Do not use the product after 6 hours.

^®

Apply evenly to avoid forming a thick, non-breathable coating.
Protect from rain for 24 hours.
Optimal protection: 5 to 7 days.
Apply WoodGuard^® Color AntiGraffiti diluted with water 5% to 10% maximum. Mix well. The first application will both soak into the wood and help the second application forms a film on the surface.
Allow to dry for half an hour to an hour at 20°C. The first coat must be dry and non-sticky before you apply a second coat.
Lightly sand to obtain a smooth surface and remove any protruding wood fibres.
Evenly apply a second coat using undiluted WoodGuard^® Color AntiGraffiti.
If a third coat is necessary, repeat the instructions given for the second coat. Wait for the surface to be completely dry before applying any additional coat.

PACKAGING

1L, 5L

To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.

SECURITY FACT SHEET >>>

To see our references, click here : References

Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.

Home >> DECORATION AND PROTECTION >> WoodGuard Color Antigraffiti

Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.

Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89