Protection products

High performance water repellent for marble and granite

ImperGuard MG is a solvent based product designed to protect polished marble, granite and other smooth mineral surfaces that have low porosity (in particular silico-limestone materials).

  • ImperGuard MG is an impregnation product and not a coating thus, allowing a treated material to breathe with a highly effective ability to resist penetration by water.
  • ImperGuard MG may be used inside and outside on all vertical and horizontal surfaces for low porosity polished materials: marble, granite, porcelain, sandstone…
  • ImperGuard MG is colourless and does not change the appearance or composition of the treated material. However, on some materials, the product may lightly enhance the colour (a sample application test is always recommended). In addition, it is UV-resistant and does not discolor with age.

Packaging

5 and 25 litres containers.

Coverage

  • 8 to 10 m² / litre

Average figures given for reference only. The actual quantity of product needed depends on the substrate’s porosity.

Properties :

  • CAN BE APPLIED TO VERTICAL AND HORIZONTAL SURFACES, INSIDE AND OUTSIDE.
  • PREVENTS THE PENETRATION OF WATER BASED LIQUIDS.
  • LIMITS FORMATION OF EFFLORESCENCE.
  • LIMITS MOSS AND LICHEN GROWTH.
  • PREVENTS DETERIORATION RESULTING FROM THE FREEZE-THAW CYCLE.
  • NON FILM-FORMING, AND ALLOWS SURFACES TO BREATHE.
  • COST-EFFECTIVE, WITH A SMALL QUANTITY OF PRODUCT SUFFICIENT TO PROTECT A LARGE SURFACE.
  • UV-RESISTANT, DOES NOT DISCOLOR.
  • ABRASION RESISTANT.
  • READY TO USE.
  • EASY TO APPLY.

Further information :

- Product application
- Building project references

Finding a distributor