SACRIFICIAL ANTI-GRAFFITI COATING
PROTECTION AGAINST GRAFFITI AND DAMAGE FROM OTHER OUTSIDE CONTAMINATION. SUITABLE FOR NON-POROUS SURFACES: METAL, PLASTIC, TILING, …
PRODUCT DESCRIPTION
FILMOGUARD is an environmentally-friendly product designed to protect the surfaces of non-porous materials which may be at risk from graffiti, both indoors and outdoors. The product is removed along with any graffiti or other damage due to rain, stains, dirt, grease, pollution or other sources.
FILMOGUARD is a preventative treatment that is both effective and quick to apply. The colourless treatment neither changes the appearance nor the colour of the treated surface. The product’s resistant qualities ensure excellent performance in bad weather and in temperatures up to 75 °C, without loss of effectiveness. Hot water from a high pressure source (90°C / 90 bars) dissolves the protective film and with it any graffiti, whether in ink or paint.
CHARACTERISTICS
- Slightly adhesive
- Non-flammable
- Non-hazardous
- Easy to use
- Water-borne product, solvent-free
- Anti-graffiti
- Protects against damage from outside sources
- Useable indoors and outside as well
- Matt, colourless finish that doesn’t change the appearance or composition of the treated surface
- Excellent resistance to bad weather thanks to its chemical make-up
- Resists heat up to 75°C, without any loss of effectiveness
- Must be reapplied after the film has dissolved, for example, following cleaning
COVERAGE PER LITRE
Coverage depends on the porosity of the material. The figures below are approximate and should be used only as a general guideline:
6 - 10 m² / litre
USAGE
- Shake the container well before use
- Apply the product to a clean surface only
- Use the product neat and do not dilute
- Apply using a spray gun, roller or brush
- Just one application is required to give full protection to the treated surface.
- Graffiti can be removed using a high pressure hot water power washer. The film will only dissolve in contact with hot water from a high pressure source (90°C, 90bars), removing the graffiti caught in the film with it
- For indoor cleaning or when cleaning delicate surfaces, use GraffiGuard 2050 (see relevant technical data sheet)
- Repeat the FILMOGUARD treatment on the cleaned surfaces
- Drying time: 4 hours
- For best results: wait 24 hours
- After applying the product, avoid any action that could damage or destroy the protective film, such as brushing or rubbing.
PACKAGING
Cans : 5L, 25L.
Respectful of Man and Environment.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés