WATER REPELLENT, OIL REPELLENT, ANTI-STAINING AND ANTI-GRAFFITI: THE ULTIMATE PROTECTION FOR STUCCO AND MARMORINO
PRODUCT DESCRIPTION
PROTECTGUARD STUCCO offers the ultimate protection for Venetian stucco and marmorino. PROTECTGUARD STUCCO can be used inside and outside. For horizontal surfaces, we recommend the use of PROTECTGUARD WET LOOK SEMI GLOSS.
Designed by the Research and Development Department of Guard Industry, PROTECTGUARD STUCCO is an ecological revolutionary water-borne product, non toxic, solvent-free, silicone-free which is intented to protect stucco, marmorino and marmorino lustro. It can also be used on “monocouche” render finishes.
PROTECTGUARD STUCCO is an impregnating product, non film-making whilst the substrate also remains permeable to air and water vapour.
PROTECTGUARD STUCCO is completely colourless after application; it modifies neither the aspect nor the nature of the treated substrate. Moreover, it perfectly resists UV and does not yellow over time.
A substrate treated with PROTECTGUARD STUCCO allows a delay in the ageing process, facilitates maintenance and allows protection of the stucco and marmorino against both water and oil.
CHARACTERISTICS
- Prevents the penetration of water and oily liquids
- Prevents deterioration resulting from the freeze-thaw cycle
- Makes cleaning easier
- Non film-forming, allows the surface to breathe
- Non-hazardous and non-toxic
- Water-borne product
- Solvent and silicone-free
- 95% + biodegradable according to OECD standards
- UV-resistant, does not discolour the treated surface
- Invisible once dry
- Ready to use
- Easy to use
- Non-flammable
Chart 1 : Stains resistance
| WATER | OIL | |
| NON-TREATED MARMORINO STUCCO |
A drop of water leaves persistent spots even after wiping |
A drop of oil leaves persistent spots even after wiping |
TREATED MARMORINO |
The drop slides. No persistent spots. |
The drop slides. No persistent spots. |
COVERAGE PER LITRE
The figures below are approximate and should be used only as a general guideline:
1 Litre = 3 to 6m²
USAGE
- Shake the container well before use
- Ensure the surface to be treated is clean, dust-free and dry before applying the product
- Use directly from the container ; do not dilute
- Apply using a low-pressure sprayer, roller or brush
- The treated surface should be impregnated to saturation point, either in one application or in two applications ‘wet-on-wet’
- On vertical surfaces, apply from the bottom up
- Drying time: 24 hours
- For the best results: wait 5 to 7 days
PACKAGING
Cans : 1L, 5L, 10L, 25L.
Respectful of Man and Environment.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés