Decap'Peintures Guard

EXTRA POWERFUL STRIPPER FOR REMOVING PAINT, VARNISH, INK, ADHESIVE PRODUCTS, GRAFFITI AND ALL KINDS OF ORGANIC COATINGS FROM BUILDING FACADES

PRODUCT DESCRIPTION

DECAP’PEINTURES GUARD is a powerful Methylene Chloride-based gel stripper designed to work on paint, varnish, thick and semi-thick plastic coatings, graffiti and ink on a whole variety of surfaces

DECAP’PEINTURES GUARD is completely emulsifiable in water during the rinsing process, thanks to specific additives.

CHARACTERISTICS

Ready to use
Easy to use
Does not alter the treated surface
Can be applied to inside and outside surfaces

COVERAGE PER LITRE

The figures below are approximate and should be used only as a general guideline:
2 - 4 m² / litre

USAGE

Designed to strip surfaces covered in paint, varnish, thick plastic coatings etc back to their original state

Preliminary testing on a small area before proceeding is strongly advised
Use the product neat – never diluted
If the product shows signs of separation mix well before using.
The surface should be dry before applying the product. Use a roller or a natural fibre brush
Allow 15 to 30 minutes for the product to act; until the coating to be removed has fully softened.

PACKAGING

Cans : 5L, 20L.

To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.

SECURITY FACT SHEET >>>

To see our references, click here : References

Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.

Home >> CLEANERS >> Decap'Peintures Guard

Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.

Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89