Protection products

Water repellent, stain and graffiti repellent for concrete less than 28 days old ProtectGuard BF
Product application

-> Back to the technical manual

PRECAUTIONS :

  • Do not use on non-alkaline substrates.
  • Do not dilute or mix with another product.
  • Do not apply on organic, metallic and waterproof materials.
  • Do not apply during rain or frost and when surface and air temperature is < 5°C & > 30°C. • Keep in a dry place (between 5°C and 30°C). • Storage: 24 months following the production date when kept in the original unopened container.

APPLICATION

  • Substrates must always be clean, dustfree and dry.
  • Always test on a small portion of the substrate before applying.
  • Use the product directly from the container.
  • Shake the container well before use.
  • The substrate must be impregnated to the point of saturation in a single application.
  • Do not over-apply the product. Remove all excess before drying 30 minutes after application.
  • On vertical substrates, always apply from the bottom up.
  • Drying time: 24 hours. Visually dry in 20-90 minutes, but full water repellency takes
  • Optimum effectiveness (eg graffiti removal) obtained after 7 days.
  • Clean equipment with water immediately after use.

MAINTENANCE

Domestic stains can be cleaned with a scrub brush and clean water, to which can be added a detergent with a neutral pH such as Décap'Sols Guard Ecological.

APPLICATION EQUIPMENT



Brush, roller or a low pressure spray unit.