UNIVERSAL CONCENTRATED DEGREASING DETERGENT FOR SYNTHETIC AND STONE BUILDING SURFACES
PRODUCT DESCRIPTION
NET’GUARD is an aqueous-based detergent used to prepare painted or unpainted walls before application of finishing product.
This degreasing, concentrated detergent is environmentally friendly and delivers food-safe standard cleaning to synthetic and stone surfaces in housing, industry and public buildings.
This degreasing, concentrated detergent is environmentally friendly and delivers food-safe standard cleaning to synthetic and stone surfaces in housing, industry and public buildings.
NET’GUARD is designed to clean and degrease all synthetic surfaces found in the built environment such as PVC, painted surfaces (painter’s preparatory cleaning solution), aluminium, zinc, brass, galvanized metal, stainless steel and plastic sheeting
It is ideally suited for the daily cleaning of tiled, porcelain stoneware and marble surfaces and may be used in industrial detergent (scrubber-driers etc.), for mechanical parts, electric generator motors etc.
CHARACTERISTICS
- Truly multipurpose product
- Very concentrated, odourless, no need to rinse
- Fast-acting, powerful degreasing properties
- Non corrosive effects on building material
- Food-safe standard cleaning
- Non-hazardous, no need for warning labelling in line with current health and safety regulations
- Environmentally friendly and bio-degradable
- Highly versatile: effective against greasy stains, nicotine staining, soot, staining due to radiators and kitchen range hoods etc.
- Non-flammable
- Ready to use
- Easy to use
- No need to pH neutralize after rinsing
- Water-borne product
- Does not alter the treated surface
COVERAGE PER LITRE
Vary according to dilution of the product and cloggingUSAGE
This product is specially designed to degrease and clean all synthetic and stone surfaces.
- A preliminary test on a small area before continuing is strongly advised
- Shake the container well before use
- Dilution rate: 1 to 5 % in water depending on the type of surface and the extent of soiling
- To apply, use: Sponge, cloth, sprayer, high-pressure equipment, scrubber-drier. If using a high pressure washer, we advise a concentration of 1 to 5 % on leaving the nozzle (depending on the state of the surface). If soaking, it is preferable to heat the water to 70°C and then leave the parts to soak. Allow about twenty minutes to act. Take out the parts, brush and rinse in running water
- Guidelines for use: Dilute product before applying. (See above). Apply product to the surface using a sponge, moving from bottom to top, then wipe with a cloth or soft wipe. No rinsing required
- The surface is ready to be painted or repainted as soon as it has been wiped down
PACKAGING
Cans : 5L, 20L.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés