BIODEGRADABLE CLEANER WITH NO NEED FOR PH NEUTRALIZATION FOR BRICK FAÇADES OR MATERIALS WITH HIGH SILICA CONTENT BADLY AFFECTED BY ATMOSPHERIC POLLUTION
PRODUCT DESCRIPTION
BIO DECAP’BRICKS GUARD is part of the new generation of stone cleaning products.
It contains no harsh substances or hazardous products. As this product is both Caustic Soda and Potassium Hydroxide-free, a surface treated with BIO DECAP’BRICKS GUARD does not need to be pH neutralized after rinsing with a power washer.
Formulated using polymers and specific admixtures, the product is harmless to both humans and the environment.
It contains no harsh substances or hazardous products. As this product is both Caustic Soda and Potassium Hydroxide-free, a surface treated with BIO DECAP’BRICKS GUARD does not need to be pH neutralized after rinsing with a power washer.
Formulated using polymers and specific admixtures, the product is harmless to both humans and the environment.
BIO DECAP’BRICKS GUARD has all the technical and environmental features to make it an ideal product for today’s – and tomorrow’s - market.
In the form of a homogeneous gel, it can be easily applied to the treated surface without the traditional constraints associated with corrosive, dangerous or toxic products.
In the form of a homogeneous gel, it can be easily applied to the treated surface without the traditional constraints associated with corrosive, dangerous or toxic products.
BIO DECAP’BRICKS GUARD is not harmful to anodized aluminium, Altuglas products, glass or rubber...no need to protect tiling and windows. Nevertheless, avoid prolonged contact with aluminium and do not allow the product to dry.
CHARACTERISTICS
- Non-flammable
- Non-hazardous (contains neither Caustic Soda nor Potassium Hydroxide)
- Biodegradable
- Ready to use
- Easy to use
- No need to pH neutralize after rinsing
- Water-borne product
- Does not alter the treated surface
COVERAGE PER LITRE
The figures below are approximate and should be used only as a general guideline:
5 - 7 m² / litre
USAGE
This product contains no harsh substances and is specially designed for removing ingrained dirt from brick facades, decorative capitals and delicate surfaces (thick plastic coating, painted surfaces…), which have been heavily soiled by atmospheric pollution.
- A preliminary test on a small area before continuing is strongly advised
- Shake the container well before use
- Use neat: never dilute
- Apply generously with a roller, brush, or spray using a low-pressure spray gun. Use normal building equipment
- Allow to act for one to three hours
- Pressure wash all treated surfaces with water
- Equipment can be washed with running water
- No need to pH neutralize the treated surface
PACKAGING
Cans : 5L, 25L.
Respectful of Man and Environment.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés