Protection products

Water-repellent, oil-repellent and anti-stain with a semi-gloss 'wet-look'

ProtectGuard 'Wet-Look' protects all porous building materials by giving treated substrates a 'semi-gloss' finish that enhances the original colour.

  • ProtectGuard 'Wet-Look' prevents water, oil and all types of soiling from penetrating materials. Materials are thus considerably easier to maintain, and look as new for longer.
  • The treatment gives the substrate a semi-gloss or satin 'wet-look' (depending on the material) and thus enhances its original colour. Being a penetrating product, ProtectGuard 'Wet-Look' allows the substrate to remain permeable to air and water vapour as well as being UV resistant. It does not turn yellow over time.

ProtectGuard 'Wet-Look' can be used indoors and outdoors without restriction on porous materials:

  • Natural stone, terracotta (floor-tiles), concrete, interlocking paving blocks, cement, etc.

Because it has excellent resistance to abrasion and scratches, it is ideal a floor treatment.

Packaging

1 and 5 litres.

Coverage

  • Per 1 litre: 6 to 10 m².

Average figures given for reference only. The actual quantity of product needed depends on the substrate’s porosity.

Properties :

  • PROTECTION AGAINST WATER & OIL
  • ANTI-STAIN & SOILING
  • DELAYS CLOGGING & AGING
  • STRONG RESISTENCE TO ABRASION & SCRATCHES
  • ALLOWS THE SUBSTRATE TO BREATHE
  • HIGH UV RESISTANCE
  • FLOORS & WALLS
  • INTERIOR & EXTERIOR
  • QUICK & EASY TO USE

Further information :

- Product application
- Building project references

Finding a distributor



Ecological Product

ProtectGuard Wet Look semi-gloss finish is :

  • water-based
  • solvent-free
  • silicone-free
  • over 90% biodegradable
  • non-toxic
  • non-hazardous
  • non-flammable