WATER REPELLENT - OIL REPELLENT - ANTI-SOILING - ANTI-GRAFFITI PROTECTS AND COLOURS POROUS BUILDING MATERIALS
PRODUCT DESCRIPTION
PROTECTGUARD COLOR : one product, two uses:
Treated surfaces will resist water penetration, grease-based dirt and graffiti. The life-span of treated surfaces will also be extended.
- Water and oil repellent
Treated surfaces will resist water penetration, grease-based dirt and graffiti. The life-span of treated surfaces will also be extended.
- Pigmented preservative
This semi-transparent product retains the texture and appearance of the mineral material it protects.
The end colour depends on both the colour of the preservative and that of the treated surface.
PROTECTGUARD COLOR may be used to either colour or to give vertical surfaces a more uniform appearance.
PROTECTGUARD COLOR is not film-forming, the treated surface remains permeable to air and water vapour.
PROTECTGUARD COLOR offers protection from dirt, all kinds of staining and other main causes of deterioration such as atmospheric pollution, grease-type stains, penetration of liquids and graffiti. It is also ideal for colouring or bringing a more uniform appearance to mineral surfaces such as concrete, lime render, terracotta and natural or artificial stone. It may also be applied to fresh concrete or to older constructions (thanks to its high alkaline-resistance qualities).
This is a one-application product that needs no primer to deliver a uniform surface to the treated surface.
It can be used on any vertical surface, inside or outside.
This is a one-application product that needs no primer to deliver a uniform surface to the treated surface.
It can be used on any vertical surface, inside or outside.
- 26 standard shades as seen on the PROTECTGUARD COLOR colour chart
- The end colour depends on the initial colour of the treated surface
- It is also possible to create your own personalized shade in the laboratory or on site (please ask for details)
CHARACTERISTICS
- Can be applied to vertical, horizontal, inside and outside surfaces
- Colours while conserving the mineral look of the treated surface, without forming a surface film
- Prevents the penetration of water and oily liquids
- Limits efflorescence formation
- Anti-staining, anti-dirt. Stops dirt from building up again due to pollution. Limits moss and lichen growth.
- Prevents deterioration resulting from the freeze-thaw cycle
- Makes cleaning easier
- Non film-forming, lets the surface breathe
- Non-hazardous and non-toxic
- Water-borne product
- Solvent and silicone-free
- 95% + biodegradable according to OECD standards
- UV-resistant, does not discolour
- Ready to use
- Easy to use
- Non-flammable
COVERAGE PER LITRE
Coverage depends on the porosity of the material. The figures below are approximate and should be used only as a general guideline:
8 - 12 m² / litre
USAGE
- Shake the container well before use
- Clean, dust and dry the surface to be treated
- Use the product neat, do not dilute
- Apply with an HVLP (high volume, low pressure) sprayer. On very porous surfaces, a short nap paint roller may be used
- The treated surface should be impregnated up to saturation point
- Apply from the bottom up
- Drying time: 24 hours
- For the best results: wait 5 to 7 days
PACKAGING
Cans : 5L, 10L, 25L.
Respectful of Man and Environment.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés