PRODUCT DESCRIPTION
TEXGUARD is the leading product for the protection of all textiles, rugs, carpets and even leather.
TEXGUARD can be used indoors and outside on all kinds of material such as cotton, velvet, suede and chintz.
TEXGUARD penetrates material right through to the weft meaning it can protect and proof fabrics, rugs and carpets against water and oil penetration and all kinds of stains.
TEXGUARD is easily and quickly applied, will make cleaning easier, offers protection lasting up to 5 washes, will not change the texture, look or alter the non-flammable qualities of your material, and is excellent value for money.
Material treated with TEXGUARD will offset a fabric’s ageing and facilitate its care.
CHARACTERISTICS
- Can be applied to vertical, horizontal, inside and outside surfaces
- Prevents the penetration of water and oily liquids
- Anti-staining, anti-dirt and anti acarid
- Makes cleaning easier
- Non-hazardous and non-toxic
- Does not discolour the treated surface
- Invisible once dry
- Ready to use
- Easy to use
- Non-flammable
COVERAGE PER LITRE
Coverage depends on the porosity of the material. The figures below are approximate and should be used only as a general guideline:
| Leather |
20 to 25 m² |
| Carpets |
15 to 25 m² |
| Textiles |
15 to 20 m² |
USAGE
- Try first on an inconspicuous area to test the product’s effect on the material’s colour
- Apply the product to a surface that is clean, dust-free and dry
- Use neat, do not dilute
- Mist using a low pressure (2 bars) sprayer at a distance of 30 cm from the surface, using one sweeping action.
- The material should not be sprayed to saturation point
- Leave 24 hours to dry
- Its effect will best be observed after 1 to 2 days
PACKAGING
Cans : 10L and 300ml sprayer.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.