WATER REPELLENT, OIL REPELLENT, DIRT AND STAIN RESISTANT:
AN ALL-ROUND PROTECTION FOR LOW POROSITY MATERIALS
PRODUCT DESCRIPTION
PROTECTGUARD FT is an environmentally-friendly product, completely water-borne (non toxic, solvent and silicone-free) which is designed to guard against the penetration of water and oil. Provides additional protection against all types of staining on relatively non-porous materials or on surfaces subject to high use levels like pavements, pedestrian precincts, patios, swimming pool decks, stairways and car parking area.
PROTECTGUARD FT is a non film-forming impregnating treatment, meaning that the treated surface remains permeable to air and water vapor.
PROTECTGUARD FT is totally colourless after application and changes neither the appearance nor the composition of the treated material. It is also UV-resistant and does not discolor with age.
A surface treated with PROTECTGUARD FT will wear better over time and be easier to care for. This treatment also offers a solution to the main causes of deterioration in these materials, like atmospheric pollution, grease-type dirt, penetration of liquids, graffiti and also makes chewing-gum easier to remove.
CHARACTERISTICS
- Effective for more than 10 years, as demonstrated by the CEBTP (Experimental Centre for Research and Study in Construction and Public Works)
- Can be applied to vertical, horizontal, inside and outside surfaces
- Prevents the penetration of water and oily liquids
- Limits efflorescence formation
- Anti-staining, anti-dirt. Prevents chewing-gum from sticking to treated surfaces and stops dirt due to pollution from building up again. Limits moss and lichen growth.
- Prevents deterioration resulting from the freeze-thaw cycle
- Makes cleaning easier
- Non film-forming, lets the surface breathe
- Non-hazardous and non-toxic
- Water-borne product
- Solvent and silicone-free
- 95% + biodegradable according to OECD standards
- UV-resistant, does not discolour
- Invisible once dry
- Ready to use
- Easy to use
- Non-flammable
COVERAGE PER LITRE
Coverage depends on the porosity of the material. The figures below are approximate and should be used only as a general guideline
| Marbre | 12.00 m² |
| Grès | 10.00 m² |
| Granit | 10.00 m² |
| Terre cuite peu poreuse | 5.00 m² |
USAGE
- Shake the container well before use
- Ensure the surface to be treated is clean, dust-free and dry before applying the product
- Use directly from the container ; do not dilute
- Apply using a low-pressure sprayer, roller or brush
- The treated surface should be impregnated to saturation point, either in one application or in two applications ‘wet-on-wet’
- On vertical surfaces, apply from the bottom up
- Drying time: 24 hours
- For the best results: wait 5 to 7 days
PACKAGING
Cans : 1L, 5L, 10L, 25L.
Respectful of Man and Environment. 
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés