BIODEGRADABLE NO-RINSE PAINT STRIPPER
PRODUCT DESCRIPTION
BIO DECAP’PEINTURES GUARD is a powerful, next generation environmentally friendly paint stripper designed to remove paint, varnish and organic coatings from a wide range of surfaces.
The arrival of this innovative product is a response to growing customer demand for products, which are effective yet, not harmful to either people or the environment.
The arrival of this innovative product is a response to growing customer demand for products, which are effective yet, not harmful to either people or the environment.
BIO DECAP’PEINTURES GUARD is classified as a non-hazardous product and therefore no warning labels or symbols are needed.
The product contains no dangerous chlorinated solvents and is paraffin-free. It has none of the drawbacks of classic Methylene Chloride-based strippers. In the form of a viscous emulsion of the "water in oil" kind, BIO DECAP’PEINTURES GUARD will remain for several hours on a vertical surface without problem (e.g for night work)
Because it is paraffin-free, the surface treated with this product may be cleaned simply by scrubbing (no rinsing needed) and may then be covered with a fresh layer of paint or other coating.
The product contains no dangerous chlorinated solvents and is paraffin-free. It has none of the drawbacks of classic Methylene Chloride-based strippers. In the form of a viscous emulsion of the "water in oil" kind, BIO DECAP’PEINTURES GUARD will remain for several hours on a vertical surface without problem (e.g for night work)
Because it is paraffin-free, the surface treated with this product may be cleaned simply by scrubbing (no rinsing needed) and may then be covered with a fresh layer of paint or other coating.
CHARACTERISTICS
- Non-flammable
- Non-hazardous (contains neither chlorinated solvents or paraffin)
- biodegradable
- Easy to use
- Can be applied to vertical, horizontal, inside and outside surfaces
- Ready to use
- No need for rinsing
- Does not alter the treated surface
- May be used on a very wide range of surfaces (metal, wood, stone…)
COVERAGE PER LITRE
The figures below are approximate and should be used only as a general guideline:
2 -4 m² / litre
USAGE
This product is specially designed to remove every trace of paint from paint-covered surfaces.
- Preliminary testing on a small area before proceeding is strongly advised
- Use the product neat – never dilute
- If the product shows signs of separation mix well before using.
- Apply with a roller or a natural fibre brush
- Allow the product to act for one or more hours, until the coating to be removed has fully softened.
- Remove the softened material using a knife
- Scrub off without rinsing
- Brush using a stiff bristle ‘scrubbing’ type brush. Do not use a wire brush
PACKAGING
Cans : 5L, 25L.
Respectful of Man and Environment.
To obtain the technical sheet, contact us with the contact form and do not forget to fill all the field.
SECURITY FACT SHEET >>>
SECURITY FACT SHEET >>>
To see our references, click here : References
Make a simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89
copyright ©guardindustrie.com - tous droits réservés