Cleaning products and strippers

Powerful remover for limescale, cement and other residue Decap'Sols Plus Guard
Product application

-> Back to the technical manual

PRECAUTIONS :

  • Decap’Sols Plus Guard is an acid-based product, prolonged contact on skin may cause burns. Always wear protective clothing, gloves and goggles.
  • Do not mix with other substances (especially not bleach, as this will cause a release of toxic chlorine gas).
  • To obtain the best look and results with cleaning, Decap’Sols Plus Guard should be shaken before use.
  • Do not apply during rain or frost and when surface and air temperature is > 10°C and < 30°C.
  • Keep in a dry place (between 5°C and 30°C).
  • Storage: 24 months following the production date when kept in the original unopened container.

APPLICATION

  • Preliminary tests on a small area are strongly advised.
  • Shake the container well before use.
  • Use neat: do not dilute or mix with other products.
  • First dampen the surface to be treated, then spray using a low pressure sprayer.
  • Allow a few minutes for the product to act, then scrub with a yard brush.
  • Rinse the surface with a cold water high pressure power washer, or use hot water for extra effectiveness.
  • Restores surfaces back to neutral pH after the first cleaning with Decap’Sols Guard.

MAINTENANCE

In order to avoid future soiling, it is recommend to finish with a protection treatment of either ProtectGuard or ProtectGuard FT.

APPLICATION EQUIPMENT



Use a low pressure spray unit.