
GROUND SURFACE RENOVATOR: REMOVES SCALE, CALCIUM DEPOSITS, PLASTER AND CEMENT LAITANCE AND RUST STAINS
PRODUCT DESCRIPTION
DECAP’SOLS PLUS GUARD completely removes scale, calcium deposits, plaster and cement laitance and rust stains.
DECAP’SOLS PLUS GUARD may be used on a wide variety of surfaces such as: tiling, terracotta, natural stone and thermoplastic finishes
DECAP’SOLS PLUS GUARD allows you to restore the surface treated with
Decap’Sols Guard to a neutral pH 7.
CHARACTERISTICS
- Non-flammable
- Ready to use
- Easy to use
- Does not alter the treated surface
COVERAGE PER LITRE
The figures below are approximate and should be used only as a general guideline:
5 -8 m² / litre
USAGE
This product is specially designed to completely remove scale, calcium deposits, plaster and cement laitance and rust stains.
- Preliminary tests on a small area are strongly advised
- Shake the container well before use
- Use neat: do not dilute or mix with other products
- First dampen the surface to be treated, then spray using a low pressure sprayer
- Allow a few minutes for the product to act, then scrub with a yard brush
- Rinse the surface with a cold water high pressure power washer, or use hot water for extra effectiveness
- Restores surfaces back to neutral pH after the first cleaning with Decap’Sols Guard.
PACKAGING
Cans : 5L, 25L.
To obtain the technical sheet, contact us with the
contact form and do not forget to fill all the field.
SECURITY FACT SHEET
>>>
Make a
simulation to obtain the requested quantity of products litres by choosing a product, the kind of material to be treated and by defining the number of square metres of the surface area to be treated.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.
Guard Industrie SAS 300 000 Euros 7 rue Gutenberg 93108 - MONTREUIL CEDEX - FRANCE
Tel : +33 (0)1 55 86 17 60 - Fax. +33 (0)1 48 58 16 89