PRODUCT DESCRIPTION
GRAFFIGUARD 2030 is a first-line treatment for all types of ink or paint-based graffiti. It removes all spray paint from concrete, clinker, brick, glazed tiles, rendering, wood and other porous surfaces except painted or fragile surfaces (glass, plexiglass…).
Thanks to its high viscosity, GRAFFIGUARD 2030 is particularly suitable if a long-lasting treatment is required, which is the case for porous surfaces.
CHARACTERISTICS
- Biodegradable to 95% in 3 days
- Blend of organic solvents
- Non-flammable
- Easy to use
- Product in solvent phase
- May be used both inside and outside
Possible applications:
- Porous support
- Slightly porous support
- Non-porous support
- Support protected by ProtectGuard
- Painted surfaces with care
- Brick, plaster, natural stone, concrete, coating…
COVERAGE PER LITRE
Average yield given for guidance only:
1 - 3 m²
USAGE
Preliminary tests are strongly recommended. Respect the relevant health and safety guidelines if using on painted or plastic surfaces. Do not use on Plexiglass.
For best results:
- Use GRAFFIGUARD 2030 on dampened surfaces. In the case of porous surfaces especially, pre-wetting the surface with water will prevent the dissolved paint from seeping any deeper into the wall
- Apply undiluted with a paintbrush or brush. Coat the graffiti generously with GRAFFIGUARD 2030, then work over the surface well with a brush
- Wait until the paint has dissolved (2 to 5 minutes), then rinse with a pressurized hot water source
- If residues or paint traces are still visible, repeat the operation or use GRAFFIGUARD 2010
- Once the graffiti has been removed, rinse with surface with copious amounts of water
For older graffiti, GraffiGuard 2030 may be applied and then left covered by a plastic sheet for several hours
TO VIEW THE APPLICATION VIDEO, CLICK BELOW :
APPLICATION VIDEO
PACKAGING
Cans : 1L, 5L.
Document and photos are not contractual .
We are not responsible of a bad use of our products.
It is indispensable to proceed to preliminary attempts.